Oliasoft WellDesign™ Public Docs
  • Introduction to Oliasoft Documentation
  • User Guides
    • User Guides Overview
    • Video User Guides
      • Adding to Library
      • Create New Project
      • Project Settings
      • Formation Inputs
        • Plot Settings
        • Add Pore and Fracture Pressure Data
        • Define Formation Temperature
        • Add Lithology
        • Add Collapse Pressure and Minimum Horizontal Stress
      • String/BHA
        • Add New String/BHA
        • Add New Component to String/BHA
        • Add Custom Component to String/BHA
        • Add New Standoff Device to String/BHA
        • Edit Component Details for a Regular Component
        • Edit Component Details for a Drill Bit
      • Trajectory Design
        • Set Site Location
        • Create Targets
        • Create a Well From a Survey List
        • Design a Well Using Parametric Build Functions
        • Create a Sidetrack/Kick-Off Well
        • Navigating Trajectory View
        • Interactive Mode in 3D Trajectory Viewer
        • Apply Error Model and Create AC Report
        • Create a Survey Report
      • Well Schematic
        • Editing BOP and Riser Details
        • Add Casing Section
        • Add Open Hole
        • Pipe Details
        • Add Tapered String
        • Add a Tubing with Packer
        • Editing Initial Conditions
        • Edit Kick Tolerance
      • Casing Loads
        • Add a Load Case to Casing Section
        • Add Custom Load
        • View All/Multiple Casing Load Results
        • Editing Loads
      • Temperature Simulation
        • Define Drilling Operation
        • Define Completion Operation
        • Define Predefined Drilling Operations
        • Define Chained Simulation
      • AFE Simulation
      • Automatic Design
      • Torque & Drag
        • Set Up Torque & Drag Simulation
        • Torque & Drag Results
        • Compare Saved Results
      • Reservoir
        • Add an Oil Reservoir
        • Add a Gas Reservoir
        • Add User Defined IPR-Curve to a Reservoir
        • Probability Distribution
      • Blowout
        • Starting a Blowout Simulation
        • Choosing Simulation Models
          • PVT Correlations in Simulation Models
          • PVT Table in Simulation Models
        • Inflow Point and Surface Roughness
        • Edit Well Kill Mechanisms
        • Edit Weighted Rates
        • Run a Simulation With More Than One Reservoir
      • Kill
        • Start a Kill Simulation
        • Edit Kill Strategy
        • Edit the Relief Well Casing Design
        • Select the Correct Drill String to Use in the Kill Simulations
        • Changing the Kill Mud
        • Staged Kill
        • Parallel Kill
      • Blowout Summary
    • Getting Access To Oliasoft Products
    • Getting Started
    • How to Navigate in the Application
      • Settings Menu
      • Libraries
    • Project Settings
    • Formation Inputs
    • Drill Strings / BHA
    • Trajectory Design
      • How to Create a Site
      • Creating a New Well
      • How to Create a Target
      • Well Editor
      • Well Charts and Plots
      • Anti-Collision Models
      • Report/Charts
      • Export
    • Well Setup
      • Well Schematic
      • Dogleg Severity Override
    • Casing and Tubing Design
      • Casing and Tubing Loads
      • Summary & Charts
      • Custom Loads
      • Annular Fluid Expansion
    • Automatic Design
    • Drilling Mechanics
      • Common Input Data
      • Torque & Drag
      • Torque & Drag Simulations
      • Hydraulics Simulations
      • Surge & Swab Simulations
      • Plot and Report
    • Reservoir
      • Reservoir Models (IPR Models)
    • Temperature Simulation
    • Blowout & Kill
      • Blowout Simulation Settings & Options
      • Blowout Simulation Scenarios & Running the Simulations
      • Dynamic Kill Simulation
      • Blowout & Kill Results
  • Technical Documentation
    • Technical Documentation Overview
    • Well Trajectory Design
    • Uncertainty Modelling
    • Casing Design (Triaxial Stress Analysis)
      • Initial Conditions
      • Axial Loads
      • Safety Factor Calculations
      • Load Cases
        • Internal Profiles
          • Negative Pressure Test
          • Displacement to Gas
          • Gas Kick
          • Lost Returns with Mud Drop
          • Riser Margin
          • Lost Returns with Water
          • Injection Down Casing
          • Tubing Leak
          • Gas Over Mud Ratio
        • External Profiles
          • Fluid Gradient (Single)
          • Fluid Gradient for Open Water
          • Fluid Gradients (Dual)
          • Fluid Gradient with Pore Pressure
          • Mud and Cement Slurry
          • Mud and Cement Mix Water
          • Minimum Formation Pore Pressure
          • Fluid Gradient with APB
          • Hydrostatic Isolation Depth
        • Installation Loads
          • Run in Hole
          • Overpull
    • Thermal Simulator
      • Overview
      • Geometry of the Computational Domain
      • The 1D Flow Computation
      • The Dynamic 2D Temperature Integration
      • Numerical Scheme for Solving the 2D-Temperature Field
    • Torque & Drag
    • Hydraulics and Surge & Swab
    • Blowout & Kill
      • Blowout Simulation
      • Dynamic Kill Simulation
  • Oliasoft System Architecture & Technology Stack
    • Oliasoft Technology Stack
      • Server Technology
      • Security
      • Simulation Engines
      • Cloud Platforms
      • Continuous Integration and Deployment (CICD)
      • Source Code Management (SCM), Issue Tracking
  • API References
    • API Overview
Powered by GitBook