Well Charts and Plots

3D Chart Viewer

The 3D chart viewer shows all wells and can be accessed in full screen in the "Trajectory Menu"

Operations in the Viewer

Function	Explanation
Casings/Grid/Lithology/Lithology Volume/Rig/Water	Select any of these options to include them in the viewer
Change Focus Point	Hold left mouse button and drag
Change View Angle	Hold right mouse button and drag
Disable Well Names	Click the "eye" icon top right corner of viewer
Full Screen and Views	Use arrows in top right corner
Turn on Ellipsoids	Click the 'Calc Ellipses' button top left corner of viewer, then select Ellipsoids
Zoom	Scroll with the pointer inside the viewer

Plan View

The plan view plot shows projections of wells in the horizontal plane. To access the plan view plot select "Plan View" from the drop down menu inside the chart viewer.

The "Plan View" plot will show the selected well or all wells is no wells are selected.

Options in Plan View

Option	Description
Show Casing	If enabled, this will show the casings' starting depths.
Show Depths	If show depths is enabled the TVD depths of the well will be displayed
Show Targets	If enabled, this will show you the projection of all wells in the horizontal plain.
Hide Wells	Select/disable wells by clicking on the well name in the plot legend.

Section View

Section view plot shows the vertical section of the well projected on to a vertical plain. The azimuth of the vertical plane is calculated by default. The casing, depth, and formation can be shown on the plot by enabling them.

The reference azimuth of the vertical plain can be manually overridden by inputting a desired reference azimuth in the top of the plot.