Oliasoft WellDesign™ Public Docs
Ctrlk
  • Introduction to Oliasoft Documentation
  • User Guides
    • User Guides Overview
    • Video User Guides
    • Getting Access To Oliasoft Products
    • Getting Started
    • How to Navigate in the Application
    • Project Settings
    • Formation Inputs
    • Drill Strings / BHA
    • Trajectory Design
    • Well Setup
    • Casing and Tubing Design
    • Automatic Design
    • Drilling Mechanics
    • Reservoir
    • Temperature Simulation
    • Blowout & Kill
  • Technical Documentation
    • Technical Documentation Overview
    • Well Trajectory Design
    • Uncertainty Modelling
    • Casing Design (Triaxial Stress Analysis)
      • Initial Conditions
      • Axial Loads
      • Safety Factor Calculations
      • Load Cases
        • Internal Profiles
        • External Profiles
          • Fluid Gradient (Single)
          • Fluid Gradient for Open Water
          • Fluid Gradients (Dual)
          • Fluid Gradient with Pore Pressure
          • Mud and Cement Slurry
          • Mud and Cement Mix Water
          • Minimum Formation Pore Pressure
          • Fluid Gradient with APB
          • Hydrostatic Isolation Depth
        • Installation Loads
    • Thermal Simulator
    • Torque & Drag
    • Hydraulics and Surge & Swab
    • Blowout & Kill
  • Oliasoft System Architecture & Technology Stack
    • Oliasoft Technology Stack
  • API References
    • API Overview
Powered by GitBook
On this page

Was this helpful?

  1. Technical Documentation
  2. Casing Design (Triaxial Stress Analysis)
  3. Load Cases

External Profiles

Fluid Gradient (Single)Fluid Gradient for Open WaterFluid Gradients (Dual)Fluid Gradient with Pore PressureMud and Cement SlurryMud and Cement Mix WaterMinimum Formation Pore PressureFluid Gradient with APBHydrostatic Isolation Depth
PreviousGas Over Mud RatioNextFluid Gradient (Single)

Last updated 6 years ago

Was this helpful?